Product Description
Sprocket motorcycle rear wheel brass drive crane timing chain snowmobile track making machine reverse gear box indonesian market
Manufacturer of Sprocket, Chain sprockets, wheel and sprocket, drive sprocket, sprocket wheel, taper lock sprocket, gear sprocket, idle sprocket, motorcycle sprocket and stainless steel sprocket, can interchange and replace with martin size sprocket, jt size sprockets, did size chain sprocket and so on.
What is motorcycle Sprocket?
A motorcycle sprocket is a toothed wheel that is attached to the engine or the rear wheel of a motorcycle. It is used to transmit power from the engine to the rear wheel, or vice versa. The size of the sprocket determines the speed of the motorcycle. A larger sprocket will make the motorcycle go faster, while a smaller sprocket will make the motorcycle go slower.
There are 2 types of motorcycle sprockets: front sprockets and rear sprockets. The front sprocket is attached to the crankshaft of the engine. The rear sprocket is attached to the rear wheel. The chain connects the front sprocket to the rear sprocket.
The size of the front sprocket and the rear sprocket determine the gear ratio of the motorcycle. The gear ratio is the ratio of the number of teeth on the front sprocket to the number of teeth on the rear sprocket. A higher gear ratio will make it easier to accelerate but will reduce top speed. A lower gear ratio will make it more difficult to accelerate but will increase top speed.
Motorcycle sprockets are an important part of a motorcycle. They help to transmit power from the engine to the rear wheel, and they can be used to control the speed of a motorcycle.
Here are some of the benefits of using motorcycle sprockets:
- They help to transmit power from the engine to the rear wheel.
- They can be used to control the speed of a motorcycle.
- They are relatively inexpensive to replace.
- They are easy to install.
Here are some of the drawbacks of using motorcycle sprockets:
- They can wear out over time.
- They can be damaged if they are not properly installed.
- They can be expensive to replace if they are damaged.
Overall, motorcycle sprockets are a good choice for motorcycles. They are relatively inexpensive, easy to install, and can help to improve the performance of a motorcycle.
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery, Agricultural Machinery, Car |
| Hardness: | Hardened Tooth Surface |
| Manufacturing Method: | Rolling Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
Can a drive chain be used in a chemical or petrochemical processing application?
Yes, a drive chain can be used in chemical or petrochemical processing applications where reliable power transmission is required. Here is a detailed explanation:
Chemical and petrochemical processing industries involve the handling, mixing, and processing of various substances, including corrosive chemicals, solvents, and hydrocarbons. Drive chains offer several advantages in these applications:
- Corrosion Resistance: Drive chains can be selected or specially designed with materials that offer corrosion resistance. Stainless steel, high-performance alloys, or coatings can be applied to the chain components to withstand the corrosive effects of chemicals and maintain chain integrity and performance.
- High Load Capacity: Chemical and petrochemical processing often involves heavy-duty operations and the movement of large loads. Drive chains are designed to handle high load capacities, providing reliable power transmission and withstanding the demanding conditions of these applications.
- Precise Control: Drive chains provide precise control over the movement of equipment and processes in chemical and petrochemical plants. The interlocking design of the chain and sprockets allows for accurate positioning, speed control, and synchronization of various components and machinery.
- Wide Operating Temperature Range: Drive chains can be engineered to operate in a wide temperature range, accommodating the temperature variations encountered in chemical and petrochemical processing. High-temperature materials or lubricants can be used to ensure optimal performance under extreme conditions.
- Resistance to Harsh Environments: Chemical and petrochemical processing environments may involve exposure to extreme temperatures, humidity, dust, and other harsh conditions. Drive chains are designed to withstand these environments, with features such as seals, specialized coatings, or materials that offer protection against contaminants and maintain reliable operation.
- Long Service Life: Drive chains, when properly selected, installed, and maintained, can provide long service life in chemical and petrochemical processing applications. Regular inspection, lubrication, and tension adjustment help optimize chain performance and minimize downtime due to chain failure.
When selecting a drive chain for chemical or petrochemical processing applications, factors such as corrosion resistance, load capacity, temperature range, speed requirements, and compatibility with industry regulations should be considered.
It is important to implement proper maintenance practices, including regular inspection, lubrication, and tension adjustment, to ensure the optimal performance and longevity of the drive chain in chemical and petrochemical processing applications.
By utilizing drive chains in chemical and petrochemical processing, operators can benefit from corrosion resistance, high load capacity, precise control, wide temperature range, resistance to harsh environments, long service life, and reliable power transmission, contributing to efficient and safe processing operations.
Can a drive chain be used in a hydraulic or pneumatic system?
A drive chain is not typically used as a primary power transmission method in hydraulic or pneumatic systems. Hydraulic and pneumatic systems rely on fluid power to transmit force and motion. However, drive chains can still be used in certain auxiliary or secondary applications within these systems. Here is a detailed explanation:
In hydraulic or pneumatic systems, the primary power transmission is achieved through the use of hydraulic fluid or compressed air. The fluid or air is pressurized and controlled to generate force and motion in actuators or motors. Drive chains, on the other hand, are commonly used in mechanical power transmission applications where direct force is required, such as in mechanical drives or conveyors.
While drive chains may not be used as the main power transmission method, they can be employed in auxiliary or secondary applications within hydraulic or pneumatic systems, including:
- Tensioning and Positioning: Drive chains can be used to tension belts or other components in a system that is driven by hydraulic or pneumatic power. They can provide accurate positioning and tension control in certain applications.
- Linkage Mechanisms: Drive chains can be utilized as part of mechanical linkage mechanisms in hydraulic or pneumatic systems to transmit motion or force between different components.
- Drive Chain Actuators: In some cases, specialized drive chain actuators can be used in combination with hydraulic or pneumatic power to provide linear or rotary motion for specific applications.
- Accessories and Ancillary Devices: Drive chains can be employed in various accessories or ancillary devices within hydraulic or pneumatic systems, such as tensioners, clutches, or braking mechanisms.
It is important to note that the selection and application of drive chains in hydraulic or pneumatic systems require careful consideration of the specific requirements, load conditions, and compatibility with the fluid power components. Consulting with experts or manufacturers is recommended to ensure the proper integration and performance of the drive chain in such applications.
What are the noise and vibration levels associated with a drive chain?
The noise and vibration levels associated with a drive chain can vary depending on several factors, including the type of chain, operating conditions, and maintenance practices. Here’s an explanation:
Noise Levels:
- Drive chains, especially roller chains, can generate noise during operation. The noise level depends on various factors, such as the chain’s design, speed, tension, lubrication, and the condition of the sprockets.
- Proper lubrication helps reduce friction and noise generation, while inadequate or dry lubrication can increase noise levels.
- Other factors, such as misalignment, worn-out components, or loose fittings, can contribute to increased noise levels. Regular inspections and maintenance help identify and address sources of excessive noise.
Vibration Levels:
- Drive chains can produce vibrations during operation, especially if there are issues such as misalignment, improper tension, or worn-out components.
- Proper tensioning, alignment, and maintenance practices help minimize vibrations and ensure smooth operation.
- Excessive vibrations can lead to accelerated wear, reduced chain life, and potential damage to other components.
It’s worth noting that advancements in chain design and manufacturing techniques have resulted in quieter and smoother-running chains. Manufacturers may also offer specialized low-noise or low-vibration chains for applications where noise or vibration reduction is a priority.
To maintain acceptable noise and vibration levels associated with a drive chain, it is important to follow proper maintenance practices, including regular lubrication, tension adjustment, and alignment checks. Additionally, addressing any sources of excessive noise or vibration promptly can help ensure the smooth and efficient operation of the drive chain.
editor by CX 2023-08-22
China high quality Crossed Helical Gear with Good quality
Compared with other transmissions, the rack and pinion have the following advantages: the instantaneous transmission ratio of the 2 wheels is constant, and the motion transmission is accurate and reliable. It can realize the information of parallel, rubber, and staggered shafts. The circumferential speed and power used range are comprehensive, and the transmission efficiency is high, generally 0.94-0.99. The service life is long, the structure is compact, and the maintenance is simple.
Compared with other transmissions, gear transmission has the following disadvantages: higher requirements for gear manufacturing and installation accuracy and higher cost. It is not suitable for information at a considerable distance from the shaft.
Gear transmission is used to transmit the movement between 2 axes in the machine. According to the relative position between the 2 axes and the tooth direction of the gear teeth, the gear transmission can be divided into 3 types: parallel shaft gear transmission, intersecting shaft gear transmission, and staggered shaft gear.
Description
| Model Number | M1,M1.5,M2,M2.5,M3,M4,M5,M8,M12 and etc. |
| Material | Brass, C45 steel, Stainless steel, Copper, POM, Aluminum, Alloy, and so on |
| Surface treatment | Zinc-plated, Nickel plated, Passivation, Oxidation, Anodization, Geomet, Dacromet, Black Oxide, Phosphatizing, Powder Coating, and Electrophoresis. |
| Standard | ISO, DIN, ANSI, JIS, BS and Non-standard. |
| Precision | DIN6,DIN7,DIN8,DIN9. |
| Teeth treatment | Hardened, Milled, or Ground |
| Tolerance | 0.001mm-0.01mm-0.1mm |
| Finish | shot/sandblast, heat treatment, annealing, tempering, polishing, anodizing, zinc-plated |
| Items packing | Plastic bag+Cartons Or Wooden Packing |
| Payment terms | T/T, L/C |
| Production lead time | 20 business days for sample,25 days for the bulk |
| Samples | Sample price range from $2 to $100. sample express request paid by clients |
| Application | 1. Automatic controlling machine 2. Semi-conductor industry 3. General industry machinery 4. Medical equipment 5. Solar energy equipment 6. Machine tool 7. Parking system 8. High-speed rail and aviation transportation equipment, etc. |
The intersecting shaft gear transmission is divided into straight tooth bevel gear transmission and curved tooth bevel gear transmission.
The straight tooth bevel gear transmission intersects 2 peripheral lines, the shaft cross angle is 90°, it is widely used, easy to manufacture and install, the information is poor in stability, the bearing capacity is low, the axial force is significant, and it is used for the operation with low speed (<5m / s =, small load and stable operation)
The curved tooth bevel gear transmission has a large intersection and coincidence between the 2 shafts, stable operation, high bearing capacity, sizeable axial force, and gear direction. It is used for transmission with high speed and heavy loads.
Staggered shaft helical gear transmission divided staggered shaft gear transmission and worm drive.
The staggered shaft helical gear transmission has 2 axes staggered, and the 2 gears are in point contact. The transmission efficiency is low, suitable for communication with low load and low speed.
The 2 axes of the worm drive are staggered. Generally, 90° and the transmission is relatively large. Generally i = 10-80. The structure is compact, the information is stable, the noise and vibration are slight, the transmission efficiency is low, and it is easy to generate heat.
Gear Transmission Maintenance
Proper maintenance is the necessary condition for extending the service life of gears for ordinary working of intelligent gear transmissions. The daily maintenance mainly includes the following contents:
1. Installation and running-in. The fixing and positioning of the gears should meet the technical requirements during installation gears. Using a pair of new gears to run in first, that is, under no-load and step-by-step loading, run for more than 10 hours to dozens of hours. Then clean the box and replace it with new oil before use.
2. Proper use of gear transmission, start-up, loading, unloading, and gear shifting, should strive to be stable to avoid impact loads and Party B is causing teeth were broken and other failures.
3. Frequently check the condition of the lubrication system, such as the amount of lubricating oil, the state of oil supply, the quality of the lubricating oil, etc., to avoid the occurrence of impact loads, and regularly replace and supplement the lubricating oil of specified brand according to the user’s specifications.
4. Monitor the operating status, and watch, touch, and hear for abnormal sounds if the cargo box is overheated, and “work with fault” is prohibited. For gear transmission at high speed, heavy loads, or on essential occasions, an automatic detection device can be adopted to ensure the safety and reliability of gear transmission.
5. Install the protective cover. For open gear transmission, the protective cover should be installed to prevent dust, chips, and other debris from entering the tooth surface, accelerating the wear of the tooth surface, and protecting personal safety.
Products Show
FAQ
Q: If there is no stock, how can HZPT Machinery provide such fast delivery?
A: Our unique manufacturing process, coupled with a large stock of tools, raw materials, and semi-finished products, allows us to complete orders in the shortest possible time.
Q: When we send the inquiry, how long will you reply?
A: We usually quote within 12 hours after receiving your inquiry. Please call me if you are very urgent, except on national holidays.
Q: Can HZPT Machinery manufacture Gears that are not on this site?
A: Of course! We can provide custom gears with the same excellent delivery options as standard gears
Q: Can HZPT Machinery manufacture metric gears?
A: Of course! We have the tools to manufacture any metric size.
Q: Do you have a minimum order quantity?
A: Our minimum requirements depend on the parts ordered. Send us your drawings, pictures, sample gears, or specifications, and we will let you know the minimum requirements for the position.
Q: How to get the lowest price?
A: Increase the quantity. The more parts you order, the lower the price you get.
Q: Are you a trading company or a manufacturer?
A: We are a factory.
Q: Can I use other materials besides steel to manufacture rack and pinion?
A: The price of racks is not fixed. Generally, we need to quote according to the customer’s required parameters such as material, tooth type, module, length, accuracy, style, spiral angle, and unique customization!
in Incheon Republic of Korea sales price shop near me near me shop factory supplier Cycles Gear of Brake Motor Spare Auto Parts as Drawing Required High Class 6 8 manufacturer best Cost Custom Cheap wholesaler
Furthermore, all our production procedures are in compliance with ISO9002 requirements. we have acquired the believe in of customers globally. Superior thermo treatment method equipment, this sort of as community warmth remedy oven, multi-use thermo treatment method oven, etc.
As a membership of HangEPT higher exact EPTs EPTrprises, HangEPT EPTzhou EPTry EPT Co.,ltd. Is EPTized in designing, production and offering all sorts of difficult amp soft toothed EPTs, founded in 2004 and found in EPTzhuang EPT park. With much more than 150 staff and masking an spot above 16000 square meters, the annual creation of business can reach above two million items EPTs, most used in vehicle oil pump, motorcar, EPT, and EPT box. The business was awarded as EPTngsu Province Large EPT EPTrprise, and EPTrprise honoring contracts and stXiHu (West Lake) Dis.Hu (West Lake) Dis. by popularity. A grade taxpaying EPTrprise and an EPTrprise of AAA credit history quality.
We have different test EPTs and equipped in excess of 200 sets lathes, incXiHu (West Lake) Dis.Hu (West Lake) Dis. all varieties of hobbing EPTs, grinding EPTs, shaping EPTs, shaving EPTs and so on. The EPTs with model quotEPTzhou quot passed Iso9001:2000 high quality system in 2008. We have several well-known clients in domestic and overEPT, incXiHu (West Lake) Dis.Hu (West Lake) Dis. Brevini from EPT, FAW Fuao business, HangEPT EPTling Intenal-Combustion Engine Fittings Co.,ltd., EPEPTn EPTngEPTGroup, EPT Buyang Group and so on.
EPTzhou inherits the organization philosophy of quotgood faith, passion, aspiration and action quot, totally uEPTzes sources superiority, continuously pioneers and invents, absorbs hello-tech talents, introduces EPT production amp inspection equipment and management approaches and continually increases quality of EPTzhou reXiHu (West Lake) Dis.Hu (West Lake) Dis.ding EPT, generation, high quality and income and so on., in addition, EPT alwaEPTremains main competitive energy in the market place.
in Ogbomosho Nigeria sales price shop near me near me shop factory supplier High Torque 12V DC Gear Motor with Small Planetary Gearbox manufacturer best Cost Custom Cheap wholesaler
Our solution range involves all types of helical gear, spur equipment, bevel gear, equipment rack, worm equipment, sprockets,chains, bearings. At any time-Power Team CO., LTD. IS Expert IN Producing ALL Types OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Velocity REDUCERS, PARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Equipment REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Car GEARBOXES, PTO Drive SHAFTS, Specific REDUCER & Relevant Equipment Elements AND OTHER Associated Merchandise, SPROCKETS, HYDRAULIC Program, VACCUM PUMPS, FLUID COUPLING, Gear RACKS, CHAINS, TIMING PULLEYS, UDL Velocity VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Equipment PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Lower BACKLASH WORM REDUCERS AND SO ON. We inspect each piece of bearing by ourselves before shipping. high torque 12v dc motor with Tiny Planetary EPT
Merchandise Description:
Specifications:
Rated voltage: 12. V DC
Rotation course: CW/CCW
Reduction ratio:763/one
Operating temperature variety: -ten-50 ordmC
Storage temperature range: -twenty-60 ordmC
Total duration: 98.2mm
EPT duration: fifty five.7mm
rated torque of EPT: 25,000gf.cm
immediate torque of EPT: 80,000gf.cm
Output EPT: two.8-10W
Output Shaft: EPT
No load:
Speed: seven rpm
Recent: 265 mA
On Load:
Rated pace: 6rpm
Rated present: 715mA
Rated torque: twenty five,000gf.cm
| Product | Software Parameters | Rated Torque of Gear Box | Quick Torque of Equipment Box | Equipment Ratio | Equipment Box Size L1 |
|||||||
| Rated | At No Load | At Rated Load | Overall Duration L |
|||||||||
| Voltage | Speed | Present | Pace | Present | Torque | |||||||
| VDC | rpm | mA | rpm | mA | gf.cm | mN.m | mm | gf.cm | gf.cm | mm | ||
| ZWBPD032032-24 | 12. | 225 | 215 | 202 | 715 | 1843 | 181 | 78.two | 25000 | 80000 | 24 | 35.7 |
| ZWBPD032032-33 | 12. | 163 | 215 | 147 | 715 | 2534 | 249 | 20000 | 80000 | 33 | ||
| ZWBPD032032-sixty seven | twelve. | eighty | 230 | 72 | 715 | 3392 | 333 | 88.2 | 25000 | 80000 | sixty seven | forty five.seven |
| ZWBPD032032-ninety four | 12. | fifty seven | 230 | 52 | 715 | 4759 | 467 | 25000 | 80000 | 94 | ||
| ZWBPD032032-133 | twelve. | 41 | 230 | 36 | 715 | 6733 | 660 | 25000 | 80000 | 133 | ||
| ZWBPD032032-188 | 12. | 29 | 230 | 26 | 715 | 9518 | 933 | 20000 | 80000 | 188 | ||
| ZWBPD032032-272 | twelve. | 20 | 265 | 18 | 715 | 10328 | 1013 | ninety eight.two | 25000 | 80000 | 272 | fifty five.7 |
| ZWBPD032032-383 | 12. | 14 | 265 | 13 | 715 | 14542 | 1426 | 25000 | 80000 | 383 | ||
| ZWBPD032032-540 | 12. | ten | 265 | 9 | 715 | 20503 | 2011 | 25000 | 80000 | 540 | ||
| ZWBPD032032-763 | 12. | 7 | 265 | six | 715 | 25000 | 2452 | 25000 | 80000 | 763 | ||
earlier mentioned technical specs just for reference and customizable in accordance to requirements.
Second Drawing:
Application
|
Audio and visual equipments |
notebook Personal computer, camcorder, car DVD, kinescope DVD, automobile CD participant, digital camera, EPT digicam, headphone stereo, cassette EPT recorder and and so forth. |
|
EPT software |
electrical shaver, tooth brush, kitchen area EPTs, hair clipper, stitching EPTs, massager, vibrator, hair dryer, rubdown EPT, corn popper, scissor hair EPT, EPT cleaner, XiHu (West Lake) Dis.Hu (West Lake) Dis.den instrument, sanitary ware, window curtain, coffee EPT, whisk and and so forth. |
|
Office EPT equipments |
CD-ROM, OA equipments, scanners, printers, multifunction EPTs copy EPTs, fax, FAX paper cutter, personal computer peripheral, financial institution EPT and etc. |
|
EPTmotive goods |
conditioning damper actuator, doorway lock actuator, retractable rearview mirror, meters, optic aXiHu (West Lake) Dis.s management device, head ligEPT beam amount adjuster, vehicle water pump, car antenna, lumbar help, computerized vending EPT and and many others. |
|
ToEPTand types |
radio management model, automated cruise manage, ride-on toy and etc. |
|
Healthcare software |
blood pressure meter, breath EPT and and so forth. |
|
EPTs |
air freshener, exhibit, stream management valves and and so on. |
|
Electrical EPT tools |
electrical drill, screwEPTr and and so forth. |
|
EPT instruments |
keep track of, optics instruments and and so forth. |
Item particulars display:
Our Solutions:
- ODM amp OEM
- EPT design and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment
- Associated EPT help
EPT amp EPT
one) EPT Particulars
packed in EPT to start with, then carton, and then reinforced with wood case for outer EPT.
Or in accordance to client’s necessity.
2) EPT Particulars
samples will be transported inside of ten days
batch orEPTleading time in accordance to the true situation.
Business Info:
HangEPT EPT EPTry amp Electronics Co., Ltd was estabEPTd in 2001,We offer the complete EPT solution for customers from layout, tooling fabrication, elements producing and assembly.
one) Competitive Positive aspects
- 1) Aggressive Positive aspects
19 year expertise in producing motor EPT
We supply technological support from r ampd, prototype, tests, assembly and serial production , ODM ampOEM
Competitive Price tag
Merchandise Functionality: Low sound, High effectiveness, EPT lifespan
Prompt Delivery: 15 functioning daEPTafter payment
Modest Orders Recognized
two) Primary EPT
-
EPT reduction EPT and its diameter:3.4mm-38mm,voltage:one.5-24V,EPT: .01-40W,output speed:5-2000rpm and output torque:one. gf.cm -50kgf.cm,
- Customized worm and EPT EPT EPTry
- Specific EPT movement module
- Specific component and assembly of plastic and steel powEPTEPT.
Certifications
We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).
and much more…
FAQ
1. Can you make the EPT with custom made requirements?
Sure. We have design and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment team, also a fantastic time period of engineers, each of them have
many function many years encounter.
2.Do you give the samples?
Of course. Our organization can provide the samples to you, and the shipping and delivery time is about 5-15daEPTaccording to the specification of EPT you want.
3.What is your MOQ?
Our MOQ is 2000pcs. But at the starting of our company, we take tiny get.
4. Do you have the item in inventory?
I am sorry we donot have the product in inventory, All products are produced with orders.
five. Do you provide EPT assist?
Of course. Our company have design and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment crew, we can supply EPT assist if you
require.
six.How to ship to us?
We will ship the products to you according to the DHL or UPS or FEDEX and so forth account you supply.
seven.How to shell out the funds?
We acknowledge T/T EPT. Also we have different lender account for receiving income, like US dollors or RMB and so on.
eight. How can I know the solution is appropriate for me?
Frist, you need to have to give us the a lot more particulars information about the product. We will recommend the product to you according to your necessity of specification. Following you affirm, we will get ready the samples to you. also we will provide some good EPTs in accordance to your item use.
nine. Can I occur to your firm to go to?
Sure, you can appear to our business to go to at anytime, and welcome to visit our organization.
ten. How do speak to us ?
Remember to send an inquiry .
China manufacturer & factory supplier for Cooperation in Seattle United States with world-class brands cnc vertical machining spur gear module With high quality best price & service
Standard roller chain is accessible with pitches from 1/2 to 3 inches. Chain figures are determined by multiplying the pitch by eighty (a 1/2 inch pitch chain would be a No. 40 chain). A hyphenated suffix indicates numerous strands.Hangzhou EPG Co.,Ltd. , was launched in November, 1997. With its 5 wholly owned subsidiaries.
Overview
Quick Information
- Relevant Industries:
-
Production Plant
- Manufacturer Identify:
-
OEM
- OEM Services:
-
Assistance
- Tolerance:
-
.01-.05mm or Tailored
- Certification:
-
ISO9001, SGS
- Surface area Treatment method:
-
Sandblasting,Sharpening,Anodize, Zinc,Nickel,Chrome,Plating, and so on.
- Application:
-
Car,Medical Equipments,Electric Appliance,Components,and so forth.
- Dimension:
-
As Customers’ Request
- Products:
-
Milling/Lathe/Drilling/4/3 Axis CNC Machining Middle
- Drawing Structure:
-
Pro/E, Vehicle CAD, Strong Operates,IGS,UG, CAD/CAM/CAE
Provide Capacity
- Offer Capacity:
- 10000 Piece/Pieces for each Thirty day period
Packaging & Shipping and delivery
- Port
- nb
-
PTO Shaft A PTO Adapter will be useful when operating Victory’s EMSD and EMHD Embankment Flail mowers. The absence of a PTO Adapter could cause the PTO shaft to conflict with the arm weldment, which connects to the CAT I/II 3 level hitch. Guide Time
: -
Amount(Parts) 1 – 500 EPG is prepared to cooperate sincerely and develop generally with buddies!
>500 Est. Time(times) thirty To be negotiated
Online Customization
Cooperation with world-course brand names cnc vertical machining spur equipment module
Solution Description
| Product Type | CNC turning, milling, drilling, grinding, wire EDM reducing and so forth. |
| Our Solutions | CNC Machining,Plastic Injection,Stamping,Die Casting,Silicone And Rubber,Aluminum Extrusion,Mould Making,etc |
| Material | Aluminum,Brass,Stainless Metal,Copper,Plastic,Wooden,Silicone,Rubber,Or as for every the customers’ needs |
| Surface Remedy |
Anodizing,Sandblasting,PProduct Experience EPG have for decades equipped quality items into higher integrity industries. With an unparalleled information of programs and procedures throughout several industries. EPG application engineers have the experience to specify the proper item for your demands.ainting,Powder coating,Plating,Silk Printing,Brushing,Polishing,Laser Engraving |
| Dimension | As customers’ request |
| Service Project | To offer creation design and style, manufacturing and technical services, mould development and processing, and many others |
| Drawing Format: | PRO/E, Auto CAD, Solid Works,IGS,UG, CAD/CAM/CAE |
| Testing Machine | Digital Height Gauge, caliper, Coordinate measuring device, projection machine, roughness tester, hardness tester and so on |
| Industry used | Machinery hefty obligation gear digital gadget Car spare parts optical telecommunication |
| Packing | Eco-welcoming pp bag / EPE Foam /Carton bins or picket boxes As customer’s particular demands |
| Trial sample time | 7-10 days right after confirmation |
| Delivery time | 7-30 times after receive the pre-payments |
| Payment Terms | T/T,Western Union,Paypal |
More services
Much more Manufacturing Component
Surface area Treatment method
Generation Approach
Why Us
Scale made in China – replacement parts – in Jakarta Indonesia Inhibitor High Viscosity Small Flow Gear Metering Pump with ce certificate top quality low price
We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Scale inhibitor substantial viscosity little stream gear metering pump
A.[Merchandise Description]
The layout utilizes higher regular exterior spur gears enclosed in a close tolerance housing assembly. This gives you the precise volume of fluid dispensed for each shaft revolution. The housing is made from precision floor and lapped 3-plate assembly. This assembly is aligned with dowe EPT to allow close control of working clearances. This design strategy in mix with several proprietary inner attributes is what guarantees exact, pulseless, and reputable movement below various procedure situations. When HangZhou Instrument pumps are coupled with a pre-packaged, built-in, closed-loop speed management and a compact motor driver assembly (AC or DC), HangZhou Instrument is capable to supply the mo EPT precise and flexible metering equipment pump program on the industry.
B.[Parameters]
| Model |
Displacement (CC/R) |
Whole Peak | Foundation Height | Min Inlet Force | Max Output Strain | Accuracy | Temperature |
| GWMP-.fifteen | .15 | eighty three | 28.1 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
|
GWMP-.three |
.three | eighty five | thirty.two | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-.six | .6 | 85 | 32 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-1.two | 1.two | ninety | 34 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-2.four | two.4 | a hundred | 42 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-3.6 | three.6 | 105 | 50 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-6 | six | 130 | forty one | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-nine | 9 | 135 | forty six | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-twelve | twelve | a hundred and forty | fifty one | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-15 | fifteen | 145 | fifty six | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-20 | twenty | one hundred fifty | sixty four | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-thirty | thirty | one hundred sixty five | eighty | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-forty | 40 | ninety | 215 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-50 | fifty | 97 | 215 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-60 | 60 | 104.five | 230 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-seventy five | 75 | 112 | 230 | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-eighty | eighty | Personalized | Customized | <0.2Mpa | <30Mpa | +/-3% | 200ºC |
| GWMP-a hundred twenty five | a hundred twenty five | Custom-made |
Customized |
<0.2Mpa | <30Mpa | +/-3% | 200ºC |
Observe: Direction of rotation: clockwise from the axis of rotation
| Model | 6CC | 9CC | 12CC | 15CC | 20CC | 25CC | 30CC |
| A | 130 | one hundred thirty five | one hundred forty | a hundred forty five | 150 | 158 | one hundred sixty five |
| B | 41 | 46 | 51 | 56 | sixty four | seventy two | 80 |
| Min Inlet Pressure | <0.2Mpa |
| Functioning Speed | 5~200 R/min |
| Medium | Fluid |
| Temperature | 200ºC |
| Max Outlet Strain | <30Mpa |
| Circulation Ability | 6-30(+/-30)CC/R |
| Sealing | Blended seal |
| Product | .15CC | .3CC | .6CC | 1.2CC | two.4CC | three.2CC | 3.6CC |
| A | eighty three | eighty five | eighty five | 90 | one hundred | 103 | one hundred and five |
| B | 28.1 | thirty.two | 32 | 34 | forty two | forty seven.six | fifty |
| Min Inlet Pressure | <0.2Mpa |
| Operating Pace | 5~200 R/min |
| Medium | Fluid |
| Temperature | 200ºC |
| Max Outlet Pressure | <30Mpa |
| Movement Capacity | .15-3.6(+/-3%)cc/r |
| Sealing | Combined |
C.[Set up]
D.[Organization Info]
- Our Organization is Top 10 Manufacture on Alibaba
- We have about 30 a long time of experience in Manufacture
- Our items have been exported to far more 100 nations and area
- ISO, SGS, CE and more certificates for your reference
- Patent technology and much more than 3 many years working existence
The use of first products manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our organization and the shown replacement parts contained herein are not sponsored, accredited, or created by the OEM.
