high effectiveness bucket lifting machine from china
Introduction
THG/TDG Substantial Productive Bucket CZPT is the upgraded from TH/TD bucket elevator. Bucket elevator is made up of sprocket/drum, chain/belt, pushed device, head section, center casing and tail segment and many others. Substantial Successful Bucket CZPT can be broadly utilised in several industries these kinds of as mining, mineral, chemical, agriculture, energy, foodstuff and other industries etc.
Benefits and Functions
1. Successful bucket elevator equipment with huge capacity, large lifting peak.
two. With types of buckets, to satisfy the necessity of various types of content.
3. THG bucket elevator adopts alloy metal ring chain, soon after floor managing and warmth managing, average hardness, higher energy, much better abrasive resistance.
4. TDG bucket elevator adopts steel cord rubber belt, very good toughness, high energy.
5. CZPT, tail elements and center housing situations with very good sealing, no content and dust leaked, with no pollution.
6. With holdback to avert substance backflow when shut down in an emergency.
seven. Base adopts counter fat just take-up system, make alone automated consider-up, to avoid belt observe slip or chain take off.
eight. Increase velocity manage sensor and mechanical level detector, it is matched by CZPT.
9. Motor model can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG and many others
10.CZPT model can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF and so on.
CZPT Parameter:
TDG Belt Bucket CZPT(with Sh bucket)CZPT Parameters Desk | |||||||||||
Main CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
160 | two hundred | 250 | 315 | 400 | 500 | 630 | 800 | a thousand | 1250 | 1600 | |
Potential Q(m³/h) | 32 | forty five | seventy two | a hundred and one | 158 | 220 | 348 | 492 | 788 | 1.22 | 1541 |
Bucket Quantity /L | 2.six | four | seven | ten | sixteen | twenty five | 40 | sixty four | 102 | 161 | 255 |
Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Excess weight of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.2 | 42.two | sixty two.3 | 78.fifty three | 106 | a hundred forty five | 155.five | 223 |
Managing Velocity v/(m/s) | one.2 | one.2 | one.34 | 1.34 | 1.5 | one.five | 1.68 | 1.65 | one.86 | one.86 | 1.836 |
Lifting top max/m | eighty | eighty | eighty | 80 | 80 | 80 | eighty | eighty | eighty | eighty | eighty |
Note:the capability in the desk is calculated according to seventy five% of the fill element. |
TDG Belt Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Main CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
160 | 200 | 250 | 315 | four hundred | 500 | 630 | 800 | one thousand | 1250 | 1600 | |
Capability Q(m³/h) | 24 | 31 | 51 | seventy four | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
Bucket Volume /L | 1.9 | 2.nine | 4.six | seven.4 | 12 | 19 | 29 | forty seven | 74 | 117 | 184 |
Pitch of Buckets /mm | 260 | three hundred | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Fat of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.2 | 42.2 | 62.3 | seventy eight.53 | 106 | a hundred forty five | 155.five | 223 |
Operating Speed v/(m/s) | 1.2 | one.two | 1.34 | 1.34 | one.5 | one.five | 1.sixty eight | 1.65 | one.86 | 1.86 | one.836 |
Lifting peak max/m | 80 | eighty | 80 | eighty | 80 | 80 | 80 | 80 | 80 | eighty | 80 |
Notice:the capability in the table is calculated in accordance to 75% of the fill element. |
THG Bucket CZPT(with Sh bucket)CZPT Parameters Desk | |||||||||||
Primary CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
160 | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Potential Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
Bucket Volume /L | two.6 | 4.1 | six.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
fat of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.four | 43.25 | 60.9 | 79.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Operating Speed v/(m/s) | 0.93 | .93 | 1.04 | one.04 | 1.17 | one.17 | one.32 | one.31 | 1.47 | one.47 | one.47 |
Lifting top max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
1. Filling issue ψ=one 2. Bucket volume=Volume of full h2o three. Greatest lifting top = axis length of bucket elevator |
THG Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Major CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
one hundred sixty | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Ability Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
Bucket Volume /L | one.9 | 2.9 | 4.6 | seven.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
excess weight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.4 | 43.25 | 60.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Managing Speed v/(m/s) | 0.ninety three | .93 | 1.04 | one.04 | 1.17 | 1.17 | 1.32 | one.31 | one.47 | 1.47 | 1.47 |
Lifting height max/m | 75 | 75 | seventy five | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
1. Filling aspect ψ=one 2. Bucket quantity=Quantity of entire h2o three. Maximum lifting peak = axis length of bucket elevator |
Choice Conditions
♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Of course or No) |
♦Handling ability (Ps. It means the whole | ♦Working atmosphere is indoor or outdoor:________ |
materials potential feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Indeed or No) |
♦Bulk Density: _____t/m3 | ♦Working atmosphere temperature: _______ ºC |
♦Lifting peak of the elevator (distance amongst | ♦Upstream gear (Ps. It indicates what type of |
inlet and outlet):__________m | equipment is utilized to feed the substance): _____ |
♦Max. granule size of the feeding material: ____mm | ♦Downstream equipment (Ps. It implies what type of |
♦Percentage of Max. granule in materials:_________% | tools is used to discharge the content): _____ |
♦Material temperature: _____ºC | ♦Working energy offer: _____V ______HZ |
♦water articles:____% |
We primarily provide the pursuing productss :
Vibrating Screen | Rotary vibrating screen |
Ultrasonic vibrating display | |
Gyratory screen | |
Trommel display screen | |
CZPT vibrating display screen | |
Circular vibrating monitor | |
Dewatering monitor | |
Vibrating feeder | |
Belt CZPT | Belt conveyor |
Sidewall belt conveyor | |
Moveable belt conveyor | |
Shuttle conveyor | |
Tripper | |
Bucket CZPT | Productive bucket elevator |
Belt bucket elevator | |
Ring chain bucket elevator | |
Plate chain bucket elevator | |
Cement bucket elevator | |
Silo bucket elevator | |
Screw CZPT | U-sort screw conveyor |
Cement screw conveyor | |
Pipe screw conveyor | |
Scraper CZPT | Horizontal scraper chain conveyor |
Incline scraper chain conveyor | |
Grain scraper chain conveyor |